Scotto's Plumbing

CALL US NOW: (727) 581-5828

TEXT SCOTTOS TO 85100 TO OPT-IN TO RECEIVE SPECIAL OFFERS. 

CALL US NOW: (727) 581-5828

Scotto's Plumbing

TEXT SCOTTOS TO 85100 TO OPT-IN TO RECEIVE SPECIAL OFFERS. 

3 Tips to Prevent Washing Machine Hose Rupture

Admin • Nov 30, 2020
Two Washing Machine — Clearwater, FL — Scotto's Plumbing
One of the most common causes of home water damage is a burst washing machine hose. All washing machines are equipped with three hoses: one that supplies hot water to your washing machine, one that supplies cold water, and one that drains the water. If a drain hose bursts or leaks, then the water inside of the washing machine can immediately flood the area instead of being directed into its proper drain. 

However, if a water supply hose bursts, serious home water damage can occur. Both water supply hoses are connected to water valves that are typically left in the on position at all times. If one of these hoses bursts, then fresh water can begin flooding your home at a rate of approximately 650 gallons per hour until you shut off the water supply. 

Read on to learn three tips to prevent washing machine hose rupture and the water damage it can cause. 

1. Choose the Right Washing Machine Hoses

There are three types of washing machine hoses: rubber, reinforced rubber, and braided stainless steel hoses.

Rubber hoses are prone to bursting, because they are not very strong. These hoses are also prone to the development of cracks that water can leak out of as the rubber degrades. For these reasons, rubber hoses should be avoided. 

Reinforced rubber hoses are made of rubber that has been reinforced with polyester mesh or braided rayon to increase hose strength. While stronger than traditional rubber hoses, reinforced rubber hoses can burst. For this reason, these hoses are suitable for washing machines located outdoors only. 

Stainless steel braided hoses are composed of traditional rubber hoses that are encased in stainless steel. The steel encasement makes these hoses much less likely to burst, making them ideal for washing machines located inside of the home. 

Washing machine hoses with special auto-shutoff technology are also available. While these hoses can vary in design, most are equipped with special connectors that sense the in change water pressure that occurs when a washing machine hose bursts. After sensing this change in pressure, the connectors stop the flow of water out of the valve attached to the broken hose. 

2. Install Your Hoses Properly

All washing machine hoses are more prone to bursting when they are not properly installed. 

Before you install your hoses, move your washing machine at least 3- to 4-inches away from its service water valves. This provides room for the hoses to run straight from the valves to the washing machine without twisting or bending. Washing machine hoses that are twisted or bent are more prone to bursting.

If you cannot install the hoses you have on hand without bending or twisting them due to their length, even when you create space between the washing machine and the valves, then purchase shorter hoses. 

When installing your hoses, tighten all connectors that attach your washing machine hoses to your home water valves securely. If these connectors are not properly secured, water can leak around them. This leaking water can cause the connector to corrode over time, increasing the chance of the hose bursting right at the connection site. 

To ensure your washing machine hoses are installed properly, have a licensed plumber install them for you to limit the chance of all types of washing machine hose problems in the future. 

3. Inspect and Replace Hoses Frequently

Even the most high-quality washing machine hoses are not designed to last forever. All hoses should be inspected at least once every several months and replaced at the first sign of damage.

Signs you should replace a washing machine hose immediately include cracks, discoloration, and crimps in rubber; unraveling of the polyester mesh or braided rayon in reinforced rubber hoses; and/or rust, corrosion, or kinks in stainless steel braided hoses. Hoses that show no signs of early damage should still be replaced every three to five years. 

If you own a washing machine, then you should know that washing machine hoses can burst, potentially leading to extensive home water damage. Follow these tips to prevent washing machine hose rupture and contact the plumbing experts at Scotto's Plumbing for professional washing machine hose installation today. 
Tree roots in sewer pipe
12 Aug, 2021
Sometimes, plumbing problems are caused by things we can see- like a clogged drain or an overflowing tub. However, these aren't always the root of the problem. While these are easy to fix, there is another dangerous plumbing issue that you should be aware of: roots in pipes. It may sound strange, but it's not unusual for roots to find their way into plumbing systems and cause a major headache. Root infiltration into your sewer lines can cause serious problems if not treated quickly and efficiently. Roots growing in sewer pipes can clog drains, back up wastewater, and even completely destroy pipes. You should be aware of the signs of roots in your pipes so that you can take quick action before the problem gets worse. Why Do Tree Roots Grow Into Pipes Tree roots grow into pipes for several different reasons. One potential cause is they are seeking something they need to grow, such as water or nutrients. Another common cause of tree roots growing into pipes is because they are already there! Many older homes have been around for decades, and trees have had plenty of time to grow in them. Roots can easily find their way into a sewer line and cause damage. Tree roots can also get into your system if you recently moved near a mass of trees. Pipes last only about 30 years, so make sure to check for leaks every year. There are numerous colors, shapes and sizes of tree roots. Roots grow every day and can even cause major blockages once they grow large enough to occupy the entire inside diameter of the pipe. Speaking of growing: They can grow about an inch or more a day and can travel through the smallest spaces to get to water. Some roots even split once they get deep enough in search of more nutrients. Even though tree roots don't consume as much water as household items as toilets do, their constant intake is still enough to give you a headache or two. Tree roots suck up water through their pores to survive, much like we do. The difference is that tree roots need more water than humans do. While humans need at least one liter of water per day for survival, trees require anywhere from 10 - 100+ liters of water every day! Signs You Have Roots In Your Pipes There are several signs to look for in the case of roots growing into your pipes. The first sign of root intrusion is if your home has a slowly draining water system. The second sign of a root in your sewer pipes is gurgling sounds coming from your toilet. Another sign is finding patches of grass that are much greener than the surrounding grass. That green grass is likely benefiting from the extra water and nutrients from the intrusion. A sunken area in the yard can often be a sign of a root intrusion. As the roots create a hole in the pipe, the surrounding dirt is washed into the city sewer. While the hole may seem small, they can create mini sinkholes which can be quite dangerous. If you do find an issue with roots in your plumbing system, it's important to call a professional plumber immediately and have the problem taken care of before you end up with a large issue on your hands. Scotto's Plumbing can perform a camera inspection to confirm the presence of roots and remove them. Preventing Roots From Entering Pipes To prevent tree roots from entering your plumbing system again, you should make sure that the trees or plants near your home are not feeding off of your water. There are a few ways to do this: Install a rain gutter to collect rainwater from nearby trees and plants. This will keep them from absorbing any of the water. Create a barrier around your house with a layer of gravel at least 3 inches thick. Be sure that it extends at least 12 inches past the perimeter of your home. The best way to create a barrier is by using four layers; the first two layers should be made up of washed gravel (gravel stones that are clean on one side), while the last two layers should consist entirely of cobble (granite-like rocks). Roots from nearby trees and plants can grow into your plumbing system, which is why you need to keep a close eye on the roots that are coming in contact with or touching your pipes. If you notice any signs of an invasion (slow draining or toilet gurgling), it's time to call in professional help to get rid of them before they cause more serious damage than just some unpleasing odors! Scotto’s Plumbing has been providing quality plumbing service to Pinellas County residents for more than 40 years. Contact us today at 727.581.5828 for all of your plumbing needs.
Stainless Kitchen Sink — Clearwater, FL — Scotto's Plumbing
10 Mar, 2021
Do you have a garbage disposal? Read our blog to learn how incorrect usage or neglect could result in immediate or long-term issues.
A Leaking Faucet — Clearwater, FL — Scotto's Plumbing
25 Jan, 2021
Slower water leaks are often ignored because they have little or hard-to-see signs. Read our blog to learn about the real cost of water leaks.
Clean Water — Clearwater, FL — Scotto's Plumbing
By Admin 12 Jan, 2021
Are you looking for a water treatment system? Read this blog to determine whether a reverse osmosis system is the best option for your home.
Clogged Faucet — Clearwater, FL — Scotto's Plumbing
By admin 23 Oct, 2020
Have you noticed dripping sounds throughout your home? Consider the following four possible causes of plumbing-related dripping sounds.
By admin 24 Sep, 2020
A slab leak is one of the most urgent plumbing problems that homeowners can face. Learn more about slab leaks, and how repiping can help.
21 Sep, 2020
Welcome back to The Sunshine State. While you were away, your plumbing system sat dormant, which can cause major problems. Before you throw on your flip flops and hit our sandy beaches, or head out for a round of golf, spend a little time checking the following items: Shut off Valves: To ensure your shut off valves aren’t stuck or leaking, turn them on and off at the toilets, sinks, and washing machines. Run water for several minutes to ensure there are no drain issues or leaks in your showers, tubs, sinks and washing machine. Flush all toilets. Run hot water in sinks and showers. Check water heater tank for leaks Check exterior hose connections for leaks Check ice maker line to it’s connected correctly and not leaking Run garbage disposal Don’t forget to check other plumbing components, like a water softener, utility sink, or reverse osmosis/drinking water system at your kitchen sink. If you have any problems or concerns, give us a call at 727.581.5828.
Woman Using Plunger  — Clearwater, FL — Scotto's Plumbing
By Admin 25 Aug, 2020
Are you unsure of what hydro-jetting constitutes? If so, discover some FAQ you may have about hydro-jetting to help you prepare for this procedure.
Tankless Water Heater — Clearwater, FL — Scotto's Plumbing
By Admin 24 Jul, 2020
Tankless water heaters are efficient and easy to maintain, but they are still susceptible to some problems. Learn more about common problems and how to fix them.
Kitchen Sink — Clearwater, FL — Scotto's Plumbing
24 Jun, 2020
Sewer line backup is a common problem that affects many homeowners. To prevent large problems, follow these maintenance strategies.
More Posts
Share by: